Three Female Threaded Ports: Run straight through + 90° branch.
Forged A105 Steel: Stronger than cast fittings — no porosity.
Equal or Reducing Tee: Equal (all ports same) or reducing (branch smaller).
Class 3000 / 6000: For high pressure hydraulic and steam systems.
NPT or BSP Threads: Both standards available.
Compact Design: Replaces welded tee + threaded adapters.

Male Threaded Plug: Screws into female threaded port for sealing.
Forged A105 Steel: High strength — no cast porosity.
Hex Head: Allows tightening with standard wrench.
Class 3000 / 6000: For high pressure system closures.
NPT or BSP: Tapered threads for pressure-tight seal.
Reusable: Can be removed and reinstalled multiple times.

Welded Branch Connection: Olet welds directly to run pipe; threaded outlet for branch.
Socket Weld or Butt Weld Run Connection: Olet welds to main pipe; branch threads on.
Forged A105 Construction: High strength branch fitting.
Threaded Outlet: Female NPT or BSP for branch pipe connection.
Class 3000 / 6000: Full pressure rating on branch.
Reinforced Design: Extra thickness at run-to-branch junction.

Reducing Adapter: Male threads on one end (smaller), female on the other (larger).
Forged A105 Steel: High strength for pressure reducing applications.
Hex Body: Allows easy wrench tightening.
Class 3000 / 6000: Multiple pressure ratings available.
NPT or BSP: Both thread standards in stock.
Saves Space: No extra nipple or coupling needed.

Forged A105 Construction: Stronger than cast caps — no porosity leaks.
Hex or Round Shape: Hex for wrench tightening; round for low profile.
NPT or BSP Threads: Tapered threads for pressure-tight seal.
Class 2000 / 3000 / 6000: Multiple pressure ratings available.
Removable Design: Unlike welded caps, these can be unscrewed.
Zinc Plated Finish: Corrosion resistant standard.

Forged Steel Construction: ASTM A105 — stronger than cast, no porosity.
45° or 90° Available: Standard angles for directional changes in small bore piping.
NPT or BSP Threads: Tapered threads provide pressure-tight seal.
Class 3000 / 6000 Rated: For high pressure hydraulic, steam, and gas systems.
Beveled Thread Entry: Helps guide pipe into threads — reduces cross-threading.
Zinc Plated or Black Finish: Corrosion protection for various environments.

Four Openings: Two on run, two opposite branches — all butt weld connections.
Equal Cross: All four ports same size (standard).
Reinforced Intersections: Extra wall thickness at all three branch junctions.
SS316L Recommended: Best corrosion resistance for high stress cross fitting.
Seamless up to 8″: Larger sizes fabricated from welded pipe.
Space Saving: One cross replaces two tees and a spool.

Permanent End Closure: Seals pipe ends in corrosive service lines.
Elliptical or Hemispherical Dome: Uniform stress distribution — stronger than flat caps.
SS304 / SS316L: Low carbon grades for welded systems.
Butt Weld Connection: Beveled end matches pipe bevel for full penetration weld.
Pickled & Passivated: Standard surface finish.
Vent Hole Option: 1/8″ or 1/4″ NPT vent for pressure testing.
 

90° Standard Turn: Most commonly used fitting for pipeline direction change.
SS304 / SS316 / SS316L: Multiple material grades for different corrosion levels.
Long Radius (1.5D): Standard for most applications — piggable.
Short Radius (1.0D): Compact option for tight equipment nozzles.
Seamless up to 12″: Larger sizes fabricated from welded pipe.
Pickled & Passivated: Standard surface treatment removes weld scale and improves corrosion resistance.