Flanged Both Ends: Direct bolt-up to flanged valves, pumps, or pipe spools.
90° or 45° Available: Standard bending angles for pipeline direction changes.
Ductile Iron Body: QT450-10 / GJS-500-7 high strength, impact resistant.
Epoxy Coated Inside & Out: 250μm fusion bonded epoxy — WRAS/NSF certified.
Long Radius or Short Radius: Choose based on space and flow requirements.
Custom Drilling: Flanges drilled to ANSI, EN, BS, JIS, or AS standards.

Concentric or Eccentric: Concentric for vertical lines; eccentric for horizontal (flat on top or bottom).
Flanged Both Ends: Direct connection to different sized flanged equipment.
Ductile Iron Body: High strength, impact resistant — will not crack like gray iron.
Smooth Internal Transition: No sharp edges — minimizes turbulence and pressure loss.
Epoxy Coated: 250μm fusion bonded epoxy for corrosion protection.
Custom Sizes: Any inlet/outlet diameter combination available.

Equal or Reducing Tee: Equal (same size all ports) or reducing (branch smaller than run).
Flanged All Ends: Three integral flanges — bolt directly to pipe, valves, or fittings.
Ductile Iron Body: QT450-10 with epoxy coating — corrosion resistant.
Reinforced Branch: Extra wall thickness at branch intersection for strength.
Full Pressure Rating: Rated PN10/PN16 throughout all ports.
Custom Drilling: Flanges can be drilled to any international standard.

Four Flanged Ports: One run + two branches + opposite branch — total 4 connections.
Equal Cross: All four ports same size — symmetrical.
Reducing Cross Options: Branches smaller than run — available on request.
Ductile Iron Body: High strength, epoxy coated for corrosion resistance.
Reinforced Intersections: Extra wall thickness at all branch intersections.
Full Pressure Rating: Rated PN10/PN16/Class 150 at all four ports.

Socket / Push-On Ends: Tyton or push-on rubber gasket joints — no bolting required.
90° or 45°: Standard angles for buried pipeline direction changes.
Integral EPDM Gasket: Factory installed rubber gasket in each socket.
Quick Joint Assembly: Simply push plain end pipe into socket — installs in 2 minutes.
Ductile Iron Body: ISO 2531 compliant — high strength for buried service.
Cement Mortar Lined: Internal lining protects against corrosion and maintains water quality.

Socket Branch & Run Ends: All three ends are Tyton/push-on sockets — simple installation.
Integral EPDM Gaskets: Factory installed in each socket — no separate gaskets needed.
Equal or Reducing Tee: Branch can be same size or smaller than the run.
Cement Mortar Lined: Standard internal lining for potable water.
Allows Joint Deflection: Up to 3°-5° angular movement at each joint.
Ductile Iron Body: High strength, impact resistant — withstands ground settlement.

All Three Ends are Sockets: Run and branch all use push-on (Tyton) joints — easiest installation.
No Flanges, No Bolts: Simple push-on assembly — no bolting or gaskets required.
Integral EPDM Gaskets: Factory installed rubber gaskets in each socket.
Ductile Iron Body: ISO 2531 compliant — for buried water and sewer lines.
Cement Mortar Lined: Standard internal lining for potable water.
Allows Angular Deflection: Each socket joint allows 3°-5° movement.

90° Duckbill Shape: Horizontally oriented rubber sleeve with 90° outlet — directs flow downward.
No Moving Parts: Pure rubber construction — nothing to jam, rust, or freeze.
Tight Seal at Zero Pressure: Rubber lips close under backpressure — zero reverse leakage.
Ductile Iron Flanged Body: Bolt-on body with rubber duckbill insert.
Ideal for Tidal Outfalls: Prevents seawater intrusion into storm or sewer lines.
Maintenance Free: No springs, hinges, or floats to service.

Flanged Both Ends: Integrally cast flanges or welded-on flanges — your choice.
Custom Length: Any length from DN50 to DN4000+ mm — manufactured to your dimension.
Ductile Iron Pipe Body: Class K9 or K12 ductile iron pipe — high strength.
Epoxy Lined & Coated: Cement mortar lining or epoxy lining available.
Drilled to Any Standard: ANSI, EN, BS, JIS, or custom bolt pattern.
Short Lead Time: Standard lengths shipped in 15 days; custom lengths 25 days.