Weld‑free design – Internal threads (NPT / BSPT / BSPP) machined into the flange; directly screws onto threaded pipe – no welding equipment needed
Ideal for hazardous areas – Perfect for oil fields, chemical plants, gas lines where open flame or hot work is prohibited
Small‑bore, high‑pressure capability – Typically used for NPS 2" and below; pressure rating up to Class 1500
Easy disassembly – Threaded connection allows quick removal for system modification, maintenance or replacement
Full material selection – Carbon steel, stainless steel, alloy steel for corrosive, high‑temp or low‑temp services
Multiple facing types – RF, FF, RTJ, etc.; manufactured to ASME B16.5 / B16.47 or EN 1092‑1

Carbon steel / stainless steel options, forged for high strength and corrosion resistance
Raised face (RF) design for enhanced gasket compression and leak-proof sealing
Compliant with ANSI/ASME B16.5, GB, DIN, JIS international standards
CNC machined sealing grooves for uniform gasket pressure distribution
Full range of sizes & pressure ratings (DN15~DN2000, Class150~2500)
100% dimensional & visual inspection, with mill test certificates available

Long tapered hub – Hub thickness gradually transitions to pipe wall, significantly reducing stress concentration at the flange root
Butt weld connection – Flange welded to pipe with beveled ends; weld can be radiographed, strength equals that of base material
Excellent sealing performance – High rigidity, minimal flange rotation under bolting force, ideal for high pressure, high temperature and cyclic conditions
Full‑bore flow path – Flange bore matches pipe I.D. – no turbulence, no dead space, reduces pressure drop and erosion/corrosion
Wide pressure coverage – From Class 150 to Class 2500, sizes NPS 1/2″ up to 48″ and above
Full material & standard range – Carbon steel, stainless steel, alloy steel; ASME B16.5 / B16.47, EN 1092‑1, GB/T 9115, etc.

45° Bend Angle: Gradual direction change — lower pressure drop than 90° elbows.
Long Radius (LR) or Short Radius (SR): LR (1.5D) standard; SR (1.0D) for tight spaces.
Seamless or Welded Construction: Seamless for high pressure; welded for large diameters.
ASTM A234 WPB / WPC: Standard carbon steel material for high temperature service.
Beveled Ends for Butt Weld: Prepares for easy field welding.
Full Traceability: Heat number stamped on each fitting.

Concentric Design: Symmetrical taper — pipe centerline remains straight.
Vertical Lines Only: Recommended for vertical pipelines or pump suction (flat top eccentric required for horizontal).
Seamless or Welded: Seamless up to 24″; welded for larger diameters.
ASTM A234 WPB: Standard carbon steel material.
Smooth Internal Transition: No sharp edges — minimizes turbulence.
Beveled Both Ends: Ready for butt welding to larger and smaller pipe.

Threaded Connection: NPT or BSP threads — screws into female threaded fitting.
Hex Head or Round Head: Hex for wrench tightening; round for low torque applications.
Solid Forged Construction: No porosity — stronger than cast plugs.
ASTM A105: Forged carbon steel for high pressure service.
NPT Threads Standard: Tapered threads provide pressure-tight seal with PTFE tape.
Low Cost: Economical way to close small threaded ports.
 

Four Openings: Two on run, two on opposite branches — all butt weld connections.
Equal Cross: All four ports same size (standard).
Reinforced Intersections: Extra wall thickness at all three branch intersections.
ASTM A234 WPB: Carbon steel for moderate temperature.
Seamless up to 12″: Larger sizes fabricated from welded pipe.
Saves Space: One cross replaces two tees and a spool piece

Reducing Tee: Branch opening is smaller than the main run.
One Fitting Replaces Tee + Reducer: Saves welding and space.
Butt Weld Connections: Beveled ends on all three ports.
Reinforced Branch: Extra thickness at the reducing intersection.
ASTM A234 WPB: Standard carbon steel.
Any Run/Branch Combination: Custom size reductions available.

Equal Tee: All three openings are the same size.
Butt Weld Connections: Beveled ends for welding to main pipe and branch.
Reinforced Branch: Extra wall thickness at intersection for strength.
ASTM A234 WPB: Carbon steel for moderate temperature service.
Seamless up to 24″: One-piece construction for high integrity.
Full Pressure Rating: Branch rated same as run.